Product description
Inductive Sensor – With Extended Temperature Range Truck BI10-P30-Y1X/S97
Threaded barrel, M30 x 1.5
Plastic, PA12‐GF30
Temperatures up to -40 °C
DC 2-wire, nom. 8.2 VDC
Output acc. to DIN EN 60947-5-6 (NAMUR)
Cable connection
ATEX category II 2 G, Ex Zone 1
ATEX category II 1 D, Ex Zone 20 for temperatures up to -25°C
SIL 2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0
SIL 3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1 with redundant configuration HTF1
General data
Rated switching distance 10 mm
Mounting conditions Flush
Secured operating distance ≤ (0.81 × Sn) mm
Correction factors St37 = 1; Al = 0.3; stainless steel = 0.7; Ms = 0.4
Repeat accuracy ≤ 2 % of full scale
Temperature drift ≤ ±10 % ≤ ± 20 %, ≤ ‐25 °C
Hysteresis 1…10 %
Electrical data
Output function 2-wire, NAMUR
Switching frequency 0.5 kHz
Voltage Nom. 8.2 VDC
Non-actuated current consumption ≥ 2.1 mA
Actuated current consumption ≤ 1.2 mA
Approval acc. to KEMA 02 ATEX 1090X
Internal capacitance (Ci)/inductance (Li) 150 nF/150 µH
Device marking Ex II 2 G Ex ia IIC T6 Gb/II 1 D Ex ia IIIC T135 °C Da (max. Ui = 20 V, Ii = 20 mA, Pi = 200 mW)
Mechanical data
Design Threaded barrel, M30 x 1.5
Dimensions 44 mm
Technical data
Housing material Plastic, PA12-GF30
Active area material Plastic, PA12-GF30
End cap Plastic, Trogamid T
Max. tightening torque of housing nut 5 Nm
Electrical connection Cable
Cable quality Ø 5.2 mm, SiHSi, Silicone, 2 m
Core cross-section 2 x 0.5 mm2
Environmental conditions
Ambient temperature -40…+70 °C
For explosion hazardous areas see instruction leaflet
Vibration resistance 55 Hz (1 mm)
Shock resistance 30 g (11 ms)
Protection class IP67
MTTF 6198 years acc. to SN 29500 (Ed. 99) 40 °C
Switching state LED, Yellow
